Dancing Wings DW DANCING POKE - Final Assembly and Preparation for Flight; Connecting Control Surfaces; Motor and ESC Installation; Propeller and CG Adjustment

DW DANCING POKE INSTRUCTION MANUAL
0.13 Connect the other end of the steel wire with
servos.horns.
0.14 Connect the motor and ESC together, assemble
the motor on the fuselage and �ix with screws (U1).
0.15 Assemble the propeller on the motor and �ix
with prop adapter.
0.16 Insert 2pcs wood poles on the each side of the
fuselage aim to �ix the wings.
0.17 Connect the wing and fuselage with rudder
band.
0.18 Assemble the battery, receiver, and adjust the
C.G, now you could try �lying.