Dancing Wings DW DANCING POKE User Manual

DW DANCING POKE INSTRUCTION MANUAL
Low wing trainer airplane
EPP
DW Dancing Poke
Accessories include
A.Fuselage
B.Wing
C.Horizontal Tail
D.Vertical Tail
E.Front landing gear woods
E1.Front landing gear screws*2
F.Back landing gear woods
F1.Back landing gear screws*3
G.Wing �iberglass reinforcement*2
H.Back landing gear wheels
I.Front landing gear wheels*2
J.Front landing gear wheel cowling*2
K.Rubber band*4
L.Steel wire*4
M.Wooden pole*2
N.Paper hinge*2
O.Servo horn *4
P.Bonding compound
Q.Propeller
R.Y-wire
S.ESC20A
T.Servo 9g*4
U.Motor 2830 1150KV
U1.Motor screws
V.Prop adapter
STANDARD SETUP
Preparation Tool
Speci�ication
Wingspan: 1150mm
Length: 675mm
Flying Weight≈700-750g
Suggested Equipment
Motor：2830 1150KV
Propeller: 9-10inch
ESC: 20A
Servos：9g*4
Battery：3s 1500-2200mAh
Radio≥4CH

Dancing Wings DW DANCING POKE Specifications

General

Brand	Dancing Wings
Model	DW DANCING POKE
Category	Toy
Language	English

Summary

Aircraft Specification and Components

Aircraft Specification Details

Provides key physical dimensions and flight characteristics of the aircraft.

Suggested Equipment List

Lists recommended motor, propeller, ESC, servos, battery, and radio.

Standard Setup and Included Parts

Details all parts included in the standard setup and accessories for assembly.

Wing and Control Surface Assembly

Wing Joining and Reinforcement

Steps for joining wing halves and inserting fiberglass reinforcement.

Aileron Servo and Linkage Installation

Covers servo insertion, wiring, and control linkage setup for ailerons.

Front Landing Gear Assembly

Describes the assembly of the front landing gear components.

Fuselage and Tail Assembly

Back Landing Gear Installation

Steps for inserting and securing the back landing gear components.

Horizontal and Vertical Tail Attachment

Instructions for attaching the horizontal and vertical tail sections to the fuselage.

Fuselage Servo and Control Linkage Setup

Guides on installing fuselage servos and connecting control linkages.

Final Assembly and Preparation for Flight

Connecting Control Surfaces

Steps for connecting the control wires to the servos' horns.

Motor and ESC Installation

Instructions for connecting and mounting the motor and ESC.

Propeller and CG Adjustment

Guidance on propeller installation and adjusting the Center of Gravity (CG).