Need help?Do you have a question about the D&B E8 and is the answer not in the manual?
General| Nominal Impedance | 8 ohms |
|---|---|
| Type | 2-way passive loudspeaker |
| Connectors | 2 x NL4 |
| Coverage Angle | 90° x 50° |
| Components | 1 x 8" woofer, 1 x 1" compression driver |
| Sensitivity | 96 dB SPL (1W / 1m) |
Essential safety guidelines for handling and operating loudspeakers to prevent accidents and health risks.
Details on special color (SC) and weather resistant (WR) versions of the E8 loudspeaker, including their features.
How to connect and configure the E8 with d&b D6 and D12 amplifiers for optimal performance.
Explanation of the CUT circuit for reducing low frequency levels, used with subwoofers.
Description of the HFA circuit for high frequency attenuation in near field or delay applications.
Details on the CPL circuit for compensating coupling effects in arrays or stage monitor use.
Instructions for operating E8 loudspeakers with the d&b E-PAC amplifier.
Guide on how to rotate the HF horn for different dispersion patterns and safety during the process.
Declaration of conformity for E8 loudspeakers with EU directives and applicable amendments.
Information on the proper disposal of the E8 product according to WEEE regulations.
To Next Page