21
Chapter 3 : Basic Setup
CAUTION: Avoid Choosing a “bright” image as
the Background
Wallpaper. Menu items may not be visible on
a bright
background.
If a bright image is accidentally chosen, perform
a Hardware
Reset to revert to original, Factory-Default
Background.
FACTORY RESET FUNCTION:
The Factory Reset function is provided under
the MISC setup
menu to revert setup settings to Factory-Default
condition.
To perform Factory Reset:
1. Navigate to MISC Setup menu using the So
Smart Remote, select FACTORY RESET.
2. Enter Admin Password when prompted.
3. Select YES, Press ENTER / SELECT.
CAUTION: Factory Reset Function cannot
be performed without the correct ADMIN
PASSWORD.
Remember to store the ADMIN PASSWORD, if
changed.
Original, Default Admin Password: 0000
Factory Reset
A Hardware Reboot may be required if the player fails to perform well. Hardware Reboot may also
be needed if the admin Password is forgotten, lost or misplaced.
Power off the So Smart Player completely.
Press the “SETUP” button and the “1” button right after, on the remote control.
Then LED light on center will turn on.
Press the “POWER” button on the remote control.
The unit reboots and returns to Factory Default condition (Warning! no light on the center).
Wait for 30 seconds before pressing on the “TVOUT” button on the remote control to obtain the video
on your TV (please wait a few seconds between each push on the button).
To Next Page
Loading...
Need help?
General
