Danelec Marine DM100 S-VDR

Need help?

Do you have a question about the Danelec Marine DM100 S-VDR and is the answer not in the manual?

Summary

Scope and Purpose

References

Lists related documentation for the S-VDR/VDR system.

Terms and Abbreviations

Defines key terms and acronyms used in the manual.

Danelec S-VDR;VDR Types

How to Determine the S-VDR;VDR Type

Explains how to identify the specific S-VDR/VDR model installed.

User Interface for DM100; DM200; DM300 S-VDR and DM400; 500 VDR

Dimmer Button

Details how to adjust the backlight brightness of the display and buttons.

Alarms

Describes how the system indicates and signals alarms.

Acknowledging Alarm

Explains the procedure to stop the audible alarm tone.

Purging the Alarm List

Describes how to clear alarms from the system display.

Incidents

Covers saving and managing incidents on the backup disk.

Back Up Drive

Details the types of backup drives (USB stick/hard disk cassette).

How to Save an Incident

Explains the steps to save an incident on the backup disk.

User Interface for DM100 VDR

Dimmer Button

Explains how to adjust the brightness of the DM100 VDR display and buttons.

Alerts

Describes the visual indication of alarms on the DM100 VDR.

Audio Test

Details the procedure for testing microphone inputs on the VDR.

Communication Audio Test

Describes the test for the VHF input to the VDR.

Operational Performance Test

Explains the simplified VDR test for signal quality and media.

Performing an OPT

Step-by-step guide on how to perform the Operational Performance Test.

OPT Report

Explains how to view and interpret the results of an OPT.

Network Data

Provides information about network errors and problems.

System Info

Displays information about the VDR model and firmware.

Analysis of Recorded Audio

Analyzes the last 15 seconds of recorded data for storage usage.

Download Data to USB Disk

Allows downloading VDR data or a support dump to a USB disk.

Handling Unresolved Alarms

Connecting a PC to the S-VDR;VDR

PC Setup

Details the necessary PC network configuration for connecting to the VDR.

Connecting the PC to the S-VDR;VDR

Explains how to physically connect a PC to the S-VDR/VDR using network cables.

Log In to the S-VDR;VDR

Guides users on how to log into the S-VDR/VDR system via a web browser.

Extracting Data from the S-VDR;VDR using a PC

Data Source: DM100;DM200;DM300 S-VDR and DM400;DM500 VDR

Explains how to select data sources for extraction on specific VDR models.

Data Source: DM100 VDR

Details the available data sources for the DM100 VDR model.

Extracting Data

Provides step-by-step instructions for extracting data from the VDR.

Extracting Data to an USB Disk (DM100 VDR)

Extracting Data from a NAS Disc

NAS Setup

Outlines the required setup for connecting a NAS disc for data extraction.

Connecting to the NAS

Guides on how to connect to the NAS using VDR Explorer software.

Exporting Data from NAS Disc to File

Explains how to extract NAS data into a separate file on a PC.

Make a Dump for Support using a PC

Make a Dump for Support to USB Drive (DM100 VDR)

VDR Explorer

Starting VDR Explorer

Instructions on how to launch and start the VDR Explorer software.

Connecting to a Data File

Guides on how to connect VDR Explorer to a data extraction file.

Play Control

Explains how to control playback of recorded data within VDR Explorer.

Playing the Data

Details how to play back recorded data and navigate through different tab pages.

Accessing the Audio

Describes how to access and control audio playback within VDR Explorer.

Vessel Information

Explains how to view vessel configuration details from extracted data.