Need help?Do you have a question about the Danelec DM100 S-VDR and is the answer not in the manual?
Lists relevant installation and manual documents.
Defines key terms and acronyms used in the manual.
Overview of S-VDR components like DAU, BAU, BMU, Capsules.
Describes the BAU's role in alarm display and backup initiation.
Details the Data Processing Unit (DPU) and its components/LEDs.
Setting the RVI address to "0" or "1".
Connecting ETH A to the DAU; Ethernet LEDs are inactive.
Status LED behavior after power on and link establishment.
Lists and explains error codes for basic S-VDR setup.
Error codes for SIU and second RVI installations.
Verifying S-VDR functionality after service on sensors.
How to set the PC's IP address for connecting to the S-VDR.
Steps to connect a PC to the S-VDR via CAT5 cable.
Lists part numbers and descriptions for common spare parts.
General| Model | DM100 |
|---|---|
| Manufacturer | Danelec |
| Category | Data Loggers |
| Recording Duration | Up to 30 days |
| Power Supply | 24V DC |
| Protection | IP66 |
| Type | S-VDR (Simplified Voyage Data Recorder) |
| Standards Compliance | IMO MSC.333(90), IEC 60945 |
| Interfaces | Ethernet, USB |
| Operating Temperature | -15°C to +55°C |
| Recording Medium | Solid-state memory |
| Approvals | Type Approval from Classification Societies |
To Next Page
