Danfoss 5000 Flux Operating Instructions

VLT
®
5000 Series
Special
functions
■ References - multi-references
If the multi-reference is used, two or more reference
signals are connected, either in the form of external
or preset reference signals. Via parameter 214 these
can be combined in three different ways:
/Sum
Multi-ref. – Relative
\ External/preset
In the following, each reference type (sum, relative
and external/preset) is shown:
S
UM
MG.51.A9.02 - VLT is a registered Danfoss trademark
83

Danfoss 5000 Flux Specifications

General

Brand	Danfoss
Model	5000 Flux
Category	DC Drives
Language	English