Danfoss AKA 245 User Manual

3) LON Port
The function defi nes a valid address range for controllers on the LON bus.
The function can also replace the activation of menu O04 in all EKC controllers as well as activation of
”Service pin” in an AK 2 controller.
Settings must be terminated through activation of BOOT-Gateway – Press ENTER.
Address range
The total address range for the connected controllers is from 1 to 120. Part of the range must be as-
signed to the LON bus. The remaining part is used by the DANBUSS.
Example
32 Manual RS8DT102 © Danfoss 09/2004 AKA 245

Danfoss AKA 245 Specifications

General

Brand	Danfoss
Model	AKA 245
Category	Gateway
Language	English