Need help?Do you have a question about the Danfoss AKA 245 and is the answer not in the manual?
Explains the role of AKA 245 in ADAP-KOOL refrigerating systems.
Illustrates system configurations with AKA 245 and other controllers.
Details physical connections for DANBUSS, LON, RS232, inputs and outputs.
Lists technical specifications like supply voltage, power, inputs/outputs, temperature.
Provides physical dimensions and installation guidelines for the AKA 245.
Lists available cables for connecting the gateway.
Specifies power connection and DANBUSS data communication cable connections.
Shows how to connect AKA 21 control panel and printer port.
Details LON, digital I/O, and data transmission termination.
How to manually switch alarm routes using the DI2 input.
Details the use of the DO2 output for alarm signal transmission.
Explains the role of the backup battery for settings and log collections.
Details connecting a modem to the gateway via RS232.
Explains connecting the gateway to a TCP/IP server.
Describes how the gateway builds and displays a network plant list.
Ensures correct communication between units on DANBUSS and LON.
Details the gateway's built-in clock for time stamping and synchronization.
How the gateway configures controller alarm settings automatically.
Registers, time-stamps, and passes alarms; explains alarm receipt methods.
Details setting up alarm routing and repeat routines for unavailable receivers.
How to display and interpret the alarm list and alarm status codes.
Details the gateway's printer output capabilities for alarms.
Describes AKC ON signal, Defrost, and Day/night functions.
Adapts system pressure to maintain required temperature.
States operation is via AKA 21 control panel or AKM software.
Details operating the gateway using the AKA 21 control panel.
Explains AKA 21 display elements and control keys like New, Enter, Arrow.
Performing settings and receiving alarms via AKM software.
Explains access protection levels and password usage.
Explains operating the printer function via DI1 input.
Outlines gateway parameter setup and initial startup precautions.
Accessing gateway setup via AKA 21 using access codes.
Details setting the gateway timer and summer/winter time changeover.
Covers reading program version and setting access codes.
Explains setting network number and gateway type.
Details how to configure communication settings.
Describes setting up router tables for message circulation.
Details setting up modem parameters and telephone numbers.
Explains setting up TCP/IP parameters and IP addresses.
Configures RS232 speed and boot gateway settings.
Defines address range for controllers on the LON bus.
Explains DANBUSS system, addresses, and network numbers for routing.
Details the necessity of router tables for network communication.
Explains Lower Limit, Upper Limit, Port No., and Address fields.
Explains how the gateway uses router tables to direct messages.
Details repeat routines for alarms when receivers are unavailable.
Explains repeat routines performed with alarm routing.
Illustrates storage capacity for data logs based on system size.
Defines key terms like Address, Baud, DANBUSS, Datagram, Network, Router.
To Next Page
General
