Danfoss DP200 User Manual

29
11032748_Rev DA_Sep2014
User Manual EIC-Engine Information Center – DP2xx
Setup Options
Selecting J1939 Monitor Signals
3. After screen type selection, select
signals to monitor. Use the up and down
arrow soft keys to cycle through
available signal selections.
4. After making a signal selection, press
the right arrow (Next) soft key to go to
the next selection area. Use the up,
down arrow, next and select soft keys to
select signal. Select the right arrow soft
key to move to the next selection area.

Danfoss DP200 Specifications

General

Brand	Danfoss
Model	DP200
Category	Touch terminals
Language	English