Danfoss FP715 Si User Manual

30
This is handled automatically. Should the installer have turned
off Automatic Time Change then follow the instructions below.
Open the fl ap on the front of the unit to reveal the programming
buttons.
To change from Summer to Winter
(clocks back) -
 press and hold - button
To change from Winter to Summer
(clocks forward) -
 press and hold + button
Changing clocks forward & back
!
Take care when making this change for the fi rst time.
If it is made in the wrong direction the unit will have
to be reset and any user-settings re-entered
(see pages 18-19 on how to reset the unit and how to
set the date, time and day).
Changing Clocks forward & back (Summer/Winter)

Danfoss FP715 Si Specifications

General

Battery Backup	Yes
Display	LCD
Operating Mode	Heating
Number of Channels	1
Switching Current	3A
Protection Class	IP30
Type	Programmer
Program	7-day, 5/2-day, or 24-hour
Switch Rating	3 A (resistive)
Temperature Range	5 to 30°C
Power Supply	230V AC
Output Type	Relay
Control Algorithm	On/Off
Operating Temperature	0 to 40°C