EasyManuals Logo

Danfoss FP715 Si User Manual

Danfoss FP715 Si
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
Service Interval Timer
Service Interval Timer
If the property is owned by a landlord he may, for gas safety
reasons, have instructed the installer to set the service
interval timer.
If set, 28 days prior to the boiler
service due date, a momentary
visual and audible warning will
remind you to have the boiler
serviced in the next 28 days.
This will be repeated each day at
noon.
If the boiler is not serviced within 28 days the daily audible
warning will sound for 1 minute at the beginning of each
hour and must be cancelled each day by pressing any
button on the unit.
In addition, all overrides and programming buttons will be
disabled and the heating and hot water will operate for a
set portion of each programmed hour.
The installer will cancel or reset the service interval timer as
part of the boiler service.
This is a gas safety feature that can only be accessed by an
installer.
When the service interval timer is set the service due date
can be viewed in RUN mode by pressing and holding the
COPY button.

Other manuals for Danfoss FP715 Si

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss FP715 Si and is the answer not in the manual?

Danfoss FP715 Si Specifications

General IconGeneral
Battery BackupYes
DisplayLCD
Operating ModeHeating
Number of Channels1
Switching Current3A
Protection ClassIP30
TypeProgrammer
Program7-day, 5/2-day, or 24-hour
Switch Rating3 A (resistive)
Temperature Range5 to 30°C
Power Supply230V AC
Output TypeRelay
Control AlgorithmOn/Off
Operating Temperature0 to 40°C

Related product manuals