Danfoss RET2001RF - Page 8

AN30483490055001-000103 RET2001RF & TP5001RF8
EN
4. Error codes
Display Description
E1 Sensor Failure
EE EEPROM Failure
Lo Measured temperature below 0 °C
Hi Measure temperature above 50 °C
E3 RF Pairing Failed
E4 RF Signal Lost
E5 RF Hardware Failure
E6 Real Time Clock Failure(TP5001RF Only)
5. Technical Specications
Specications
RET2001RF /
TP5001RF
RX1-S V2
Operating
Product is designed
forcontinuoususe
Operating Voltage
2.5–3VDC
(2 x AA alkaline
batteries)
230Vac
50/60Hz
Output - Volt free
Setting temperature
range
5 °C to 35 °C -
Operating temperature
range
0 °C to 40 °C
Installation Guide