EasyManua.ls Logo

Danfoss RT52 - Page 5

Danfoss RT52
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
 Prior to mounting the unit should be set in either ON/OFF or
chrono-proportional control mode (see below).
ON/OFF - boilers switches ON when below set temperature
and OFF when above.
Chrono-Proportional - energy saving feature which  res
the boiler at regular intervals to maintain a set temperature,
achieving a constant ambient environment for the user.
Some existing thermostats will have a Neutral wire and/or
Earth wire connected. These are not required by the RT51/52
and must NOT be connected to any RT51/52 terminals. Instead
they should be made electrically safe and coiled in the recess at
the back of the RT51/52.
ON/OFF CHRONO
!
Installation Instructions
GB

Related product manuals