EasyManua.ls Logo

Danfoss RX1-S

Danfoss RX1-S
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CET2000B-RF + RX1-S + CS2
Wireless Electronic Hot Water Cylinder Thermostat
Installation Guide
Danfoss Heating
Question and Answer IconNeed help?

Do you have a question about the Danfoss RX1-S and is the answer not in the manual?

Danfoss RX1-S Specifications

General IconGeneral
BrandDanfoss
ModelRX1-S
CategoryThermostat
LanguageEnglish

Summary

Product Specifications

Installation

Sensor Installation

Details on mounting the sensor to the cylinder, including height, surface preparation, and insulation considerations.

Sensor Wiring

Instructions for wiring the CS2 sensor to the CET2000B-RF, specifying cable cross-section requirements.

RX1-S Receiver Unit Installation

Guidance on installing the RX1-S receiver unit, including its wiring and electrical connections.

CET2000 B-RF Thermostat Mounting

Steps and diagrams for securely mounting the CET2000B-RF thermostat onto its wallplate.

Hard Wired Heating with Wireless Hot Water Control, 3 Port Mid-Position Valve

Wireless Heating and Hot Water Control, using 2 x 2 Port Valves

Hard Wired Heating with Wireless Hot Water Control, 2 x 2 Port Valves

Wireless Heating & Hot Water Control, with 3 Port Mid Position Valve

Key Lock Feature

Commissioning Devices

Related product manuals