To Next PageTo Next Page
Need help?Do you have a question about the Danfoss VLT 2015 and is the answer not in the manual?
General| Enclosure Type | IP20 |
|---|---|
| Control Method | VVCplus (Voltage Vector Control) |
| Communication Options | RS-485 |
| Cooling Method | Convection cooled |
| Ambient Temperature Range | -10°C to +40°C (derating above 40°C) |
| Storage Temperature Range | -25°C to +65°C |
| Relative Humidity | Maximum 95% (non-condensing) |
| Altitude | Up to 1000m above sea level (derating above 1000m) |
| Protection Features | Overvoltage, Undervoltage |
Essential steps for mechanical, electrical, and EMC-correct installation.
Installation guides and technical data for VLT 2000 units.
Initial setup, programming, and basic configuration of the VLT.
Verifying connections, testing, and commissioning the VLT system.
Explanation of VLT components, operating principles, and optimization.
Detailed guide for installing the VLT frequency converter.
Instructions for using the control panel and operating the VLT.
Detailed explanation of VLT parameters and their functions.
