To Next PageTo Next Page
Need help?Do you have a question about the Danfoss VLT 2025 and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Protection Class | IP20 |
| Supply Voltage | 380-480 V |
| Input Voltage | 380-480 V |
| Output Voltage | 0 to input voltage |
| Control Mode | V/F control, vector control |
| Enclosure | IP20 |
| Communication Options | RS-485, CANopen, Profibus |
| Ambient Temperature | -10 to +50 °C |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | Max. 95% (non-condensing) |
| Cooling Method | Fan Cooled |
Measures to ensure electromagnetic compatibility during installation.
Initial setup procedures and parameter programming for VLT operation.
Guidance on selecting the correct VLT model based on motor specifications.
Configuration of open loop, closed loop, and PI controller modes.
Using RS 232 for communication, parameter access, and control commands.
Flowcharts and steps to diagnose and resolve common operational issues.
