VLT
®
5000 Series
Programming
delay time has been set in parameter 120; also,
a reference signal must be present.
145 Minimum DC brake time
(DC BRK MIN. TIME)
Value:
0-10sec.
✭ 0 sec.
Function:
IfaminimumDCbraketimeisnecessarybeforeanew
start is possible, this parameter can be set.
Description of choice:
Select the desired time.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A9.02 - VLT is a registered Danfoss trademark
113
To Next Page
Loading...
