VLT
®
5000 SyncPos option
MG.10.J4.02 – VLT is a registered Danfoss trade mark
20
Fundamentals of the SyncPos program
SyncPos is a programming language specially designed for synchronizing and
positioning control which is easy to learn, the commands of which are based on
frequently used control terminology. This macro-language makes it possible to
realize complex functions with simple commands even without knowledge of the
hardware processes and thus create control programs and general control
programs in a very short time.
The SyncPos software contains all commands and menus necessary for the
configuration, programming, optimization and, finally, for the transfer of
commands to the SyncPos option.
To Next Page
Loading...
