Danfoss VLT 5000 Series User Manual

Description of choice:
In some cases this dynamic compensation can cause
resonance’s in the DC link and should then be disa-
bled. Typical cases are where a line choke or a passive
harmonic filter (e.g. filters AHF005/010) is mounted in
the mains supply to the frequency converter to sup-
press harmonics. Can also occur on mains with low
short circuit ratio.
VLT
®
5000 Series
140 MG.51.C5.22 - VLT
p
is a registered Danfoss trademark.

Danfoss VLT 5000 Series Specifications

General

Frequency	50/60 Hz
Cooling Method	Forced Air Cooling
Enclosure	IP20
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication Interfaces	RS-485, Profibus
Enclosure Rating	IP20