VLT
®
FCM Series
on the basis of the difference between Ref
MAX
and
Ref
MIN
following the value is added to Ref
MIN
.
Thechoicebetweenreferencepresetscanbemade
via the digital inputs or via serial communication.
Description of choice:
Set the fixed reference(s) that is/are to be the option.
See P332, P333, P334 and P335 Description of choice,
where the description of the digital input set up is given.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.03.H3.02 - VLT is a registered Danfoss trademark
50
To Next Page
Loading...
