Dangbei DBOX02 - EU Declaration of Conformity

EU DECLARATION OF CONFORMITY
Product : Smart Projector
Trademark : Dangbei
Model Designation : DBOX02
Manufacturer’s Name : Shenzhen Dangs Science and Technology Co., Ltd.
Manufacturer’s Address : 901, GDC Building, Gaoxin Mid 3nd Road, Maling Community, Yuehai Sub-district, Nanshan District, Shenzhen,China.
Manufacturer’s Phone : 86-755-26907499
We, Shenzhen Dangs Science and Technology Co.,Ltd.declare under our sole responsibility that the above referenced product is in
conformity with the applicable requirements of the following directives:
RED Directive : 2014/53/EU RoHS Directive : 2011/65/EU (EU) 2015/863
WEEE Directive : 2012/19/EU REACH Regulation : 2006/1907/EC
Conformity with these directives has been assessed for the product by demonstrating compliance to the following harmonized standards
and/or regulations:
EN 62311:2008
EN 301489-3 V2.3.2 (2023-01)
EN 55035:2017+A11:2020
EN 301893 V2.1.1 (2017-05)
2011/65/EU， (EU) 2015/863
Signed for and on behalf of: Shenzhen Dangs Science and Technology Co., Ltd.
Place: Shenzhen, China Date: 2024-02-07 Name: Libing Zhang Position: Certification Engineer
Signature:
EN IEC 62368-1:2020+A11:2020
EN 301489-17 V3.2.4 (2020-09)
EN 61000-3-2:2019+A1:2021
EN 300440 V2.1.1 (2017-03)
2006/1907/EC
EN 301489-1 V2.2.3 (2019-11)
EN 55032:2015+A11:2020
EN 61000-3-3:2013+A2:2021
EN 300328 V2.2.2 (2019-07)
2012/19/EU
20
EN