Need help?Do you have a question about the Dangbei Mars Pro and is the answer not in the manual?
General| Display Technology | DLP |
|---|---|
| Brightness | 3200 ANSI lumens |
| Throw Ratio | 1.27:1 |
| Operating System | Android 9.0 |
| RAM | 3 GB |
| ROM | 16 GB |
| HDR Support | Yes |
| Speakers | 10W x2 |
| Connectivity | Wi-Fi, Bluetooth |
| Storage | 16 GB |
| Ports | HDMI, USB, Audio Out |
| Weight | 4.6 kg |
| Wi-Fi | 802.11ac |
| Resolution | 3840 x 2160 (4K UHD) |
| Native Resolution | 3840 x 2160 (4K UHD) |
Diagram and labels for the projector's front, including lens and TOF/Camera.
Diagram and labels for the projector's rear, showing ports like HDMI, USB, LAN, Audio, DC IN.
Diagram showing the projector's left side with air ventilation.
Diagram showing the projector's right side with air ventilation.
Diagram and labels for the projector's top, including light sensor and power button.
Diagram showing the projector's bottom with a PTZ bracket socket.
Explains the LED behavior for standby and Bluetooth pairing modes.
Instructions for opening the battery holder and installing 2 AAA batteries.
Details the function of each button on the remote control.
Describes the behavior of the indicator light when a key is pressed.
Explains long press for auto-focus and short press for quick settings.
Instructions to connect to a wireless network via Settings > Network.
Instructions to connect to a wired network using the LAN port.
Guide to perform online software updates via Settings > System > Software update.
To Next Page
