DANGO CR-01 - CR-01 Watch Operation; Chronograph and Sub-dial Setting

PUSH-BUTTON A
START / STOP TIMER
RUNNING
SECONDS
ELAPSED SECONDS
SUB-DIAL
CR-01
ELAPSED
MINUTES
SUB-DIAL
CHRONOGRAPH
HAND
PUSH-BUTTON B
RESET TIMER
1 2 3
CROWN
POSITIONS
POSITION 3B: SETTING CHRONOGRAPH HANDS
& SUB-DIALS
- PULL CROWN OUT TO POSITION 3
- KEEP PUSH BUTTONS A & B DEPRESSED
SIMULTANEOUSLY FOR AT LEAST 2 SECONDS UNTIL
CHRONOGRAPH HAND MAKES A FULL ROTATION.
THIS PUTS YOU IN SETTING MODE.
- BY PRESSING PUSH BUTTON A, YOU CAN NOW
SET YOUR CHRONOGRAPH HAND POSITION.
- BY PRESSING PUSH BUTTON B YOU CAN CHOOSE
BETWEEN SUB-DIALS AND BACK TO CHRONOGRAPH HAND.
- BY PRESSING AND HOLDING DOWN PUSH-BUTTON A,
YOU CAN RAPIDLY ROTATE THE SUB-DIAL HANDS.
- PUSH THE CROWN BACK INTO POSITION 1 TO
CONTINUE RUNNING TIME.