FOR TECHNICAL QUESTIONS, CALL (877)432-6627
19
You MUST reinstall the top carriage stop bolt (shown below) after the top trough is installed and secured.
Tighten the carriage stop bolt to 2-3 ft b of torque upon final installation inspection. These instruc-tions
must be followed to insure proper installation and operation of your lift. Failure to comply with these
instructions can result in serious bodily injury and or death and or void product warranty. Manufacturer will
assume no liability for loss or damage of any kind, expressed or implied resulting from improper installa-
tion or use of this product.
WARNING
To Next Page
Loading...
