Need help?Do you have a question about the Dantherm calorex WA 1234BC and is the answer not in the manual?
Overview of heat pumps covered in the manual, including models and operating ranges.
Explains the thermodynamic vapour compression cycle and efficiency (C.O.P.).
Proper placement and location guidelines for optimal heat pump performance.
Ensuring adequate air intake and discharge for efficient operation.
Instructions for water pipework, fittings, and condensate drainage.
Procedures for setting and verifying correct water flow through the unit.
Diagrams showing typical water circuit configurations for installation.
Guidance on avoiding corrosion in swimming pool systems due to dissimilar metals.
Essential information on electrical connections, supply, and safety standards.
How to change the location of the digital thermostat on the PP22BC model.
Linking pool pump operation with the PP22BC chiller for effective chilling.
Electrical schematic for the WA634ACH single-phase model.
Electrical schematic for the WA1222AC single-phase model.
Electrical schematic for the WA1234BC three-phase model.
Electrical schematic for the AW634AHC single-phase model.
Electrical schematic for the WA634ACL single-phase model.
Electrical schematic for the AW1234BHC three-phase model.
Electrical schematic for the AW1834BHC three-phase model.
Electrical schematic for the PP22BC three-phase model.
Explanation of thermostat controls for different models and their functions.
Status indicators for the AW 634 heater chiller model.
Status indicators for the AW 1234/1834 heater chiller models.
Status indicators for the WA634ACH/ACL models.
Status indicators for the WA chiller models.
Warning and initial steps for diagnosing heat pump issues.
User guide for checking common operational problems on specific models.
User checklist for identifying and resolving issues with AW1234/1834HC.
User checklist and error message explanations for the PP22BC model.
Detailed performance specifications and technical data for all models.
Visual guides showing unit dimensions and installation space requirements.
Steps to safely shut down and drain the heat pump for winter.
Procedures for restarting the heat pump after a period of inactivity.
Conditions and limitations of the manufacturer's warranty.
Logbook for recording refrigerant handling, leak tests, and maintenance history.
To Next Page
General
