Dantherm HCP 11 User Manual

6
052533 – Version 1.0 –15.08.2019
en
Using the control panel, continued
Filter and error
indications
This button is the alarm reset. If the LED lights up in orange it’s a warning
indicating that the filter needs to be
changed. Please see the service guide
section in the Service Manual for the product to learn how to replace the
filters.
P
ress the button once to mute for a period of time
•
Press and hold for 10 seconds to reset the filter timer. This can be done with or
without filter alarm is present
When there is an alarm on the unit the alarm LED will flash
red as many times as the
alarm number
(see error number in the Service manual of the ventilation unit).
This visual LED alarm will be
followed by a buzzer sound on the HCP11.
Remote Control
Error indicated by
HCP 10
Flashing LED
HCP 11
Flashing LED and buzzer sound

Dantherm HCP 11 Specifications

General

Brand	Dantherm
Model	HCP 11
Category	Remote Control
Language	English