Need help?Do you have a question about the Dantherm HRC 3 and is the answer not in the manual?
General| Brand | Dantherm |
|---|---|
| Model | HRC 3 |
| Category | Remote Control |
| Language | English |
Explains the purpose and target audience of the remote control.
Lists controllable functions and readable information on the remote.
Step-by-step guide to pair the remote control with the ventilation unit.
Information on connecting multiple remote controls to one unit.
Visual representation of the remote control's display layout.
Detailed explanation of symbols and buttons on the remote control.
Overview of operating programs and information available in the user menu.
How to use the navigation button for menu interaction and value adjustment.
Lists shortcut key combinations for specific functions.
Explains different operation modes like AUTO, Manual, Week program, and Away.
How to set the start and end times for the night mode.
Details the principles and types of afterheating functions.
Step-by-step instructions for configuring afterheating setpoints.
Procedure for setting the clock for week programs and night mode.
Describes the fireplace function and its activation conditions.
Explains automatic and manual bypass-cooling modes and their usage.
Overview of display information shown during operation.
Explains display screens for different modes and their symbols.
Details information displayed in the info-line, including alarms and settings.
Explanation of how fan speed is indicated on the display.
How display information varies with accessories and operation mode.
Unit operation in HEAT RECOVERY and BYPASS-COOLING modes with accessories.
How AUTO mode uses VOC, CO2, and RH% for control.
Interpretation of VOC/CO2 concentration levels for air quality.
Correlation between room humidity levels and fan speed settings.
Purpose and target audience for the installer menu.
Procedure to activate the installer menu.
Lists available menus and operating information within the installer mode.
Information displayed in the INFO LINE within the installer menu.
How to select desired AUTO programs in the AUTO menu.
How to set the RH% setpoint for demand-control in AUTO mode.
How to view and adjust nominal rpm for supply and extract fans.
Procedure for enabling or disabling the preheater accessory.
How to view and change setpoints for BYPASS-COOLING.
Control strategy for pre-/aftercooling coils and bypass.
Table of setpoints, factory settings, min, and max values.
List of error codes and their corresponding alarm/error messages.
Lists week program codes and provides descriptions of typical household scenarios.
To Next Page
