DAPAudio M10 User Manual

10
M10 – M12 – M15
Ordercode: D3660 – D3661 – D3662
Model:
M15
System:
Active Bi-Amp 15” Monitor
Output Power:
Class D, 335W LF power, 65W HF power
Maximum SPL @1M:
125dB/ 128dB Peak
Frequency response (-10dB):
60Hz – 20kHz
Transducer Low:
15” Woofer, 2,56” Vioce Coil
Transducer High:
1” Neodymium Compression Driver, 1” Voice Coil
Nom Dispersion (HxV):
70° x 70° (-6dB)
Audio Input:
XLR/ Jack Combo balanced
Link Output:
XLR-male balanced
External Controls:
Mic/Line switch, EQ Preset switch (Monitor/FOH), Ground Lift switch,
Volume control, Signal-Limiter indication LED, Power Switch with
green LED
Electronic Protection:
Thermal/ Overload/ Limiter/ Compressor
Mounting:
Floor and Integrated 35mm Pole Socket
Power Supply:
AC 100V~240V, 50 Hz/60Hz (SPSU)
Power Input:
Neutrik Powercon
Housing:
Wedge design 15mm MDF with Scratch Resistant Black Paint
Dimensions (HxWxD):
493 x 460 x 399mm
Net Weight:
18,4Kg
M10
M12
M15

DAPAudio M10 Specifications

General

Brand	DAPAudio
Model	M10
Category	Monitor
Language	English