The DAP Audio PR62 is a 2-way plastic box design loudspeaker, available in black (order code: D3505) and white (order code: D3506). This manual provides essential information for safe operation, unpacking, specifications, spare parts, dimensions, troubleshooting, and return procedures.
Function Description:
The PR62 is designed as a loudspeaker for indoor use, providing sound output with a 2-way system. It is suitable for various audio applications where a compact and robust speaker is required. The speaker is not intended for main power connection and should only be serviced by qualified personnel to avoid voiding the warranty.
Important Technical Specifications:
- Design: 2-Way Plastic boxdesign
- Woofer: 6.25" Mica cone rubber edge woofer
- Woofer Magnet: 10 Oz
- Tweeter: 12.6 mm Mylar dome tweeter
- Tweeter Magnet: 1.49 Oz
- Nominal Impedance: 16 Ohm
- Input Power: 50W RMS / 80W Max.
- Frequency Response: 55Hz-20KHz
- Dimensions (LxWxH): 205x220x290 mm (including mounting/hanging brackets)
- Weight: 3.30 Kg
- Order Codes: D3505 Black, D3506 White
Spare Parts:
- Bass Speaker: SPHS0003 PR-62 BASS SPEAKER NEW
- High Speaker: SPHS0009 PR-62 HIGH SPEAKER NEW
Usage Features:
- Unpacking: Upon receipt, carefully unpack and inspect the contents for any damage. Retain all packing materials in case the fixture needs to be returned.
- Safety Precautions:
- Always read the user manual carefully for your own safety.
- Be cautious of dangerous voltage when touching wires.
- Keep the manual for future reference.
- Clean the speaker only with a dry cloth.
- Ensure sufficient clearance behind the mounting surface (e.g., ceiling) for installation, avoiding obstructions like A/C channels or power lines.
- Protect speaker wires from damage, as damaged wires can lead to poor sound quality and amplifier damage.
- Verify that the mounting surface can support the speaker's weight.
- Never connect main power to the loudspeakers, as this will damage them.
- Use cables of the correct gauge, especially for long runs.
- Maintain clear color indication and polarity throughout the entire system when using cables.
- Avoid loud microphone feedback, which can damage the speaker.
- The speaker is intended for indoor use only; do not expose it to rain or moisture.
- Troubleshooting:
- No Sound: Check all cable connections. If the issue persists, review installation instructions or consult a professional.
- Low and Poor Sound: Ensure speakers are well-insulated. Adding insulation can buffer sound, prevent it from going into the attic, and secure speakers to prevent vibrations.
- Uneven Sound: Ensure insulation is applied evenly around each speaker to maintain consistent sound absorption levels.
- Sound Warping/Distortion: Adjust treble and bass levels. In rooms with few furnishings or without carpet/rugs, you may need to decrease treble to prevent tinny sound. If speakers are too close to walls or not aimed properly, decrease bass to prevent low tones from bouncing.
Maintenance Features:
- Cleaning: Clean the speaker only with a dry cloth.
- Servicing: This apparatus should only be serviced by qualified personnel. Unauthorized servicing may void the warranty.
- Return Procedure:
- Returned merchandise must be sent prepaid and in its original packing, clearly labeled with a Return Authorization Number (RMA number).
- Products returned without an RMA number will be refused.
- To request an RMA, contact Highlite International B.V. (phone: 0031-455667723 or email: aftersales@highlite.nl).
- Provide the model number, serial number, and a brief description of the return cause.
- Properly pack the fixture; shipping damage due to inadequate packaging is the customer's responsibility.
- Highlite reserves the right to repair or replace products at its discretion.
- Include the following information inside the box with the RMA number: your name, address, phone number, and a brief description of the symptoms.
- Claims:
- Clients must inspect delivered goods immediately for any shortcomings or visible defects.
- Damage incurred in shipping is the responsibility of the shipper and must be reported to the carrier upon receipt.
- Report transportation damage to Highlite within one day of delivery.
- Return shipments must be post-paid and accompanied by a letter explaining the reason for return. Non-prepaid returns will be refused unless otherwise agreed.
- Complaints must be made in writing or by fax within 10 working days of invoice receipt. Complaints will only be considered if the client has complied with all parts of the agreement.
Need help?
To Next Page
General
