Need help?Do you have a question about the Darkglass Electronics Microtubes 500 v2 and is the answer not in the manual?
Overview of the 500W amplifier, its layout, Master volume, and 6-band EQ with mid controls.
Explains the Microtubes Engine's function for adding compression, harmonics, distortion, and its footswitch engagement.
Adapts to various cabinet configurations and power requirements for consistent delivery.
Details the front panel's input jack, passive/active switch, and Microtubes Engine engagement.
Explains controls like Compression, Drive, Tone, Level, Blend, B3K/VMT, EQ, Master, and Mute.
Details speaker output, send/return, USB, DI output, and power connections on the rear panel.
Explains controls like Ground Lift, DI Output, USB, Footswitch, and AC power functions.
Visual representation of the signal path through the amplifier's circuits.
Details warranty period, registration, and contact procedures for repairs and support.
Lists input/output impedance, power, dimensions, weight, and electrical requirements.
Covers essential safety precautions regarding user serviceability, environment, hearing, and cable usage.
Provides solutions for common problems like unresponsive controls, no power, low sound, or distortion.
General| Type | Bass Amplifier |
|---|---|
| Technology | Solid State |
| Channels | 1 |
| MIDI | No |
| USB | No |
| Input Impedance | 1 MΩ |
| Effects Loop | Yes |
| Headphone Output | Yes |
| Cabinet Simulator | No |
| Controls | Gain, Blend, Drive |
| Effects | Drive |
| Inputs | 1 x 1/4" Instrument Input |
| Outputs | 1 x XLR |
| Footswitch | Optional |
| Output Impedance | 4Ω / 8Ω |
| DI Output | Yes |
| Power Supply | 100-240V AC |
| Power Output | 500W RMS @ 4 Ohms, 350W RMS @ 8 Ohms |
| EQ | 4-Band EQ (Bass, Lo Mids, Hi Mids, Treble) |
To Next Page
