Das-Kit L7 - Error Code Display and Interpretation

!
5.7 ERROR CODE DISPLAY
When the display comes up error, the icon and error code will flash together
with 1Hz. Each error code is corresponding with the fault definition.
!
※
Only get rid of the error will clear the error code display.
The error code display is as below.
Error Code
Definition
0
normal
1
Current error or MOS damaged
2
Throttle error(detection after turning on)
3
motor without phase position
4
Hall error
5
Brake error(detection after turning on)
6
Under voltage
7
Motor stalling
8
communication controller receiving error
9
communication display receiving error
6