Need help?Do you have a question about the DAS MAX Series and is the answer not in the manual?
Connect all pipes with connectors for tents with even side lengths using M6x50 screws.
Connect all pipes with connectors for tents with uneven side lengths, noting extension tube placement.
Connect roof connectors (A3, A4) with horizontal cantilevers (10) using M6x35 screws.
Connect roof connectors (61) to horizontal cantilevers (62) and attach to connectors (4/5) and horizontal bar (10).
Ensure the ready-made structure matches the provided diagram.
General| Ventilation | Mesh windows and vents |
|---|---|
| Floor Material | Polyethylene |
| Poles Material | Fiberglass |
| Waterproof Rating | 2000mm |
| Capacity | 4-person |
| Setup Time | 5-10 minutes (estimated) |
To Next Page