8 9
SETTING UP YOUR MIXERSETTING UP YOUR MIXER
Make sure the Petite Mixer and all of its components are clean prior to assembly and use.
ATTENTION: To prevent damage to the appliance, the Beaters and Dough Hooks should
NOT be used together.
1. Place the Main Base on a clean and stable surface.
2. Position the Mixing Bowl onto the Rotating Plate. Hold
the Rotating Plate in place and turn the Mixing Bowl
clockwise until it locks into place.
3. Hold down the Tilt Release Button and push the Motor
Head upwards. Release button to lock in place.
4. Insert the right and left Beater accordingly into the Beater
Shaft. Push the Beater until it clicks into place.
Note: Beater pairs must be used together and should not
be mixed with Dough Hooks.
5. Press the Tilt Release Button to push the Motor Head
down.
Your Petite Mixer is ready for use!
To Next Page
Loading...