PAGE TITLE
12 13
MAINTENANCE
DISASSEMBLY AND CLEANING
1. Turn the Mixer to the “0” (Off) setting before unplugging and cleaning.
2. Tilt the Motor Head upwards and press the Eject button to remove Beaters.
3. Turn the Mixing Bowl counterclockwise until it detaches from the Main Base.
4. Wash both Mixing Bowl and Beaters in warm, soapy water.
5. Wipe down the Main Base with a damp dish cloth.
Clean your Mixer thoroughly before using. Make sure to turn your Mixer to the “0”
or (OFF) setting before unplugging and cleaning. Both the Mixing Bowl and Beaters are
dishwasher safe. After each use, the Mixer should be cleaned properly.
WARNING: DO NOT SUBMERGE THE MOTOR IN WATER OR ANY LIQUID. THE
MAIN BASE IS NOT DISHWASHER SAFE.
To Next Page
Loading...