12 ∙ cleaning & maintenance
• IMPORTANT NOTE: DO NOT SUBMERGE POWER BASE OR KETTLE IN WATER OR ANY
OTHER LIQUIDS. TO AVOID DAMAGING THE APPLIANCE, NEVER USE ABRASIVE OR
HARSH CLEANING PRODUCTS TO CLEAN THE KETTLE SURFACE.
• In order to keep your Dash Easy Kettle in pristine working order, follow the cleaning
recommendations periodically.
• Fill the Kettle with water up to the 1L mark. Place on the Power Base and press the Power
Switch to turn on.
• After the water comes to a boil and the Kettle automatically shuts off, remove Kettle from
the Power Base. Pour in a small amount of dish soap and soak overnight or for 8 - 12 hours.
• Pour out the soapy water and rinse until no suds remain. Fill the Kettle with 1L of clean
water and bring to a boil. Carefully pour out the hot water.
• Allow your Easy Kettle to cool, then thoroughly dry with a soft cloth.
• Note: Make sure that the Kettle, Power Base, and cord are completely dry before storing.
CLEANING & MAINTENANCE
To Next Page
Loading...