using your dash everyday ice cream maker ∙ 13 12 ∙ using your dash everyday ice cream maker
Freeze the Cooling Bowl overnight. The Cooling Bowl must be in an upright position.
The freezer temperature must be 0℉ or lower for the Cooling Bowl to freeze properly.
Prepare your ice cream mixture and chill in the refrigerator. We recommend chilling
your mixture for an hour or two. The Dash Everyday Ice Cream Maker can hold up to
3 cups of liquid mixture. Do not exceed 3 cups when preparing your mixture.
When sufciently cold, place your Cooling Bowl on a stable surface.
Attach the Motor Unit to the Splash Guard by aligning the tabs on the Motor Unit with
the holes on the Splash Guard. Attach the Paddle to the Motor Unit. The Paddle will
click into place. It does not need to be screwed in. (Photo A)
Lower the Motor Unit with Paddle and Splash Guard into the Cooling Bowl (Photo B)
Press the Power Switch to turn the Motor Unit on. The Paddle will begin to turn.
(Photo C)
SLOWLY pour your chilled ice cream mixture into the Cooling Bowl through the
Ingredient Chute. (Photo D)
When the mixture is fully frozen and rises to ll the Cooling Bowl, the ice cream is
ready to serve. It is recommended to use a rubber or wooden spatula or spoon to
serve your ice cream in order to prevent damage to the inside of the Cooling Bowl. The
Dash Everyday Ice Cream Maker prepares up to 4 cups of fresh, homemade
ice cream.
1
2
3
4
USING YOUR DASh Everyday ice cream maker
A B
C D
5
6
7
8
making ICE CREAM
To Next Page
Loading...
