Dash GUARDIAN - Whats in the Box; Know Your Guardian

Note:
Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
LED Indicator Status
Green light flashing
Red light flashing
Green and Red light
flashing alternately
Green light on
Powered off/LED turned off
Rebooting after reset
Booting
Device malfunction
Waiting for network
Operating properly
Network connection failed
Off
Red light on
Firmware updating
Camera ×1
What’s in the Box Know your Guardian
Power Adapter ×1
QSG ×1
Mounting Plate ×1
Power Cable ×1
Hole Guide ×1
Hardware Package ×1
Weather Foam Seal ×1
LED Indicator
Lens
Built-in Mic
Micro SD
Card Slot
Built-in
Speaker
Reset Button
Power Port
GUARDIAN