∙ 12 ∙
using your citrus juicer
Tips and Tricks
• You can inuence the amount of pulp content in your juice
by using the Screen Opener. For a high pulp content, set the
screen opener to the large dot mark so that the openings in the
screen are open wide.
• In order to achieve the largest juice yield possible, the
Juicer Cone will change direction of rotation after several
starts and stops.
• If the Juicer Cone is not turning, check if there are fruit
pips/seeds between the Juicer Cone and the Screen
and remove them.
• Cut the citrus fruits in half.
• Exert slight pressure on the half of the citrus fruit when pushing the
cut surface down onto the Juicer Cone. Be sure not to put exces-
sive pressure on the Juicer Cone. The Cones will start turning and
the juice will begin to ow into the Juice Container. Once the juice
reaches the 600 ml mark, empty the Juice Container. Never exceed
the 600 ml mark.
Note: As soon as you stop pressing on the Juicer Cone, the Citrus
Juicer will stop.
• Unplug the Citrus Juicer before removing the Juice Container from
the Base.
• Turn the Juice Container counterclockwise and lift from the base.
Pour the juice out of the Juice Container. Make sure to clean the
appliance after each use as soon as possible so that the pulp does
not dry and stick to the surface.
Always remember to use fresh, washed fruit. Always ensure that
nothing is on the Screen or in the Citrus Juicer before operating.
∙ 13 ∙
To Next Page
Loading...
Need help?
General
