page- 7
Operating Manual G12/G18/G22/G32
5. Declaration of conformity
Dashclean Industries Inc.
No.68, Danghu Road, Suzhou
Wuzhong District, Suzhou, China
declares under its sole responsibility that the following machine
G12 / G18 / G22 / G32
included in this declaration, follows the provisions of the:
EN ISO 12100:2010
EN 60204-1:2006/AC:2010
EN 61000-6-2:2005/AC:2005
EN 61000-6-4:2007/A1:2011
according to
Machine Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
EMC Directive 2014/30/EU
6. Warranty
Dashclean offers to its customer the vacuums and accessories a 12-month factory
warranty for material and manufacturing defects.
In the event of any complaint, the machine or agreed part must be returned to us or
our authorized representative for a warranty examination and for any warranty
repair or replacement. And the machine or parts must be sent to us carriage free
unless otherwise agreed.
A warranty repair shall be conducted in a Dashclean facility only or in an authorized
Technical Support Centre. If the repair claims appear warranty invalid, the costs
relating to repair and/or replacement of parts shall be charged to the buyer.
The warranty does not cover defects which are the result of normal wear and tear,
negligence, defective use, unauthorized repair or the vacuums being connected to
the incorrect voltage.
The warranty shall be invalidated in the event of the machine having been repaired
by unauthorized person or its serial number has been removed or altered.
To Next Page
Loading...