Daspi DS252 A+R - Control Board Programming; Photobeam and Automatic Closure; Power Interruption and Recovery; Maneuvers Time Programming

DS252 A+R
16
OFF Photobeam is enabled. This configuration allows the
programming of optional automatic closure.
ATTENTION: IN CASE THE ELECTRICAL CONNECTION IS CUT, WHEN RESTORING IT,
THE CONTROL UNIT MUST DO THE COMPLETE MANEUVER FOR CORRECT
OPERATION
PROGRAMMATION
WIFI BUTTON PROGRAM BUTTON
OPTION 1 – MANEUVERS TIME PROGRAMMING
Press LEARN button until 1 beeps sound that means it is on
maneuvers time programming.
OPTION 2 (DIP 1 ON)
OPTION 2 (DIP 1 OFF)