Daspi MAGIC 1-E User Manual

2005
MAGIC 1 - E
Centrale di comando per cancelli scorrevoli.
Control panel for sliding gates.
Cuadro de maniobra para puertas correderas.
Programmateur pour portails coulissants
Daspi Automazione Cancelli S.r.l.
Via Copernico, 76/78 36034 Malo (Vi) Italy tel. ++39 0445 602261 fax. ++39 0445 585035
www.daspi.it info@daspi.it

Daspi MAGIC 1-E Specifications

General

Brand	Daspi
Model	MAGIC 1-E
Category	Control Panel
Language	English

Summary

Model Information

Main Components Overview

Control Panel Programming and Adjusting

Step by step operation setting

Configures gate operation modes like Open-Stop-Close-Stop or Open-Close-Open.

Automatic shutting time configuration

Enables or disables the automatic closing function of the gate.

Working time adjustment

Sets a fixed 2-minute working time or enables self-learning for the motor.

Photocell function control

Controls photocell behavior during closing or both opening/closing cycles.

Pre-flashing activation setting

Activates a pre-flashing warning light before gate movement starts.

Residential system mode

Manages gate response to START commands during opening cycles.

Power Adjusting for Electronic Clutch

Working Time Adjustment Details

Automatic Shutting Setup

Transmitter Code Management

Setting Different Transmitter Codes

Procedure for memorizing up to 32 different transmitter codes.

Erasing a Single Transmitter Code

Process to remove one specific transmitter code from memory.

Erasing All Transmitter Codes

Method to clear all memorized transmitter codes from the receiver.

Terminal Descriptions