To Next PageTo Next Page
Need help?Do you have a question about the Daspi Pixel and is the answer not in the manual?
General| Brand | Daspi |
|---|---|
| Model | Pixel |
| Category | Control Panel |
| Language | English |
Identifies the PIXEL control panel, its version, and its purpose for 24 VDC sliding gates.
Diagram illustrating key components and connections on the PIXEL control panel.
Details prohibitions for unqualified staff and DASPI's non-responsibility for improper use, modifications, or explosive atmospheres.
Describes the PIXEL control panel's design for 24 Vdc sliding gates, including electronic clutch and radio receiver.
Explains the function of trimmers for pause time, opening torque, and closing torque.
Details the functions of DIP switches for pre-opening light, residential mode, and photocell features.
Instructions for setting the control panel using DIP-switches, ensuring disconnection from mains power.
Description of LED indicators (DL1-DL11, LED1, LED2) and their meanings related to panel functions.
Details the 433.92 MHz radio receiver's capacity for storing 256 remote controls.
Procedure for storing new remote controls using the INS or DEL/PED buttons and remote transmitter.
Instructions for deleting single radio codes or all stored codes from the receiver.
Step-by-step guide to programming gate travel limits and slowing down points using the PRGM button.
Guidance on adjusting torque (CL PWR, OP PWR) and pause time (TCA) for safe gate operation.
