To Next PageTo Next Page
Need help?Do you have a question about the Daspi MAX 800 and is the answer not in the manual?
General| Power supply | 230V AC |
|---|---|
| Motor voltage | 24V DC |
| Max. thrust | 800N |
| Protection level | IP44 |
| Max. gate weight | 800 kg |
Provides essential safety guidelines for using and installing the electromechanical barrier, emphasizing user caution and product conformity.
Instructions for periodic maintenance, cleaning photocells, checking electronic clutch, and lubricating gate components.
Steps for dismantling the automation, including cutting power, disconnecting electrical installation, and removing components.
Details the MAX gear motor's intended use for sliding gates up to 800kg and its requirement for a DASPI control panel.
Vital safety instructions for operating the automation, emphasizing checking safety devices, keeping children away from controls, and periodic inspection.
Essential checks before installation, including product integrity, gate structure, electrical compatibility, and manual maneuverability.
Information that the MAX gear motor is provided with permanent lubrication and does not require replacement.
Locating the installation point, preparing the cement base, and installing protective coverings for cables.
Fixing the mounting plate, installing the gear motor, and meshing the pinion with the gate rack.
Adjusting the distance between the pinion and rack for proper meshing and ensuring correct alignment through manual operation.
Emphasizes correct mesh engagement and mechanical stops for rack and pinion longevity.
Procedure for manually operating the gate during installation, power failure, or malfunction using a release key.
