Data Aire dap4 - Introduction; Control Capabilities; Efficiency Features; Alarm Management System

Data Aire’s dap4 Modbus TCP/IP
 Document:600‐000‐961version4.0 4

8. After entering the correct information to log on to the Ethernet card, you will be taken to the
following screen.
9. Click the configuration tab on the left. Then click on the BACnet tab across the top of the screen.
10. This field is where you can change the settings for the card. The device instance of the card is
changed beside the pCOWeb Device Inst text. Each card must have its own unique device
instance.