Need help?Do you have a question about the Data Aire Mini dap4 and is the answer not in the manual?
General| Brand | Data Aire |
|---|---|
| Model | Mini dap4 |
| Category | Controller |
| Language | English |
Details the standard features of the Mini dap4 system, including hardware and interface capabilities.
Explains the operational features and functionalities of the unit, including load activation and control logic.
Covers diagnostic tools, service features, and programmable delays for alarms.
Lists all warning and alarm messages that can be displayed on the unit for user awareness.
Step-by-step instructions on how to safely power the Mini dap4 unit on and off.
Guide to navigating system menus and understanding the service and factory level password structure.
Configuration of unit power status, start-up delay, and operating mode.
Instructions for viewing and adjusting temperature, humidity, and other operational setpoints.
Guides for programming night set-back, week-end, and special day schedules.
Procedure for calibrating the unit's installed temperature and humidity sensors for accuracy.
Setting up alarm thresholds, limits, and notification preferences for unit operation.
Steps to acknowledge and silence active alarm conditions displayed on the unit.
Procedure for clearing the stored historical alarm data from the system.
Details the sequence and timing logic for compressor operation during cooling cycles.
Explains the control logic for chilled water valve modulation based on temperature.
Describes the control sequences for dehumidification and humidification functions.
Details the logic for controlling humidity and cooling based on dewpoint setpoints.
Information on setting up the Mini-dap4 for the gPod model, including special features.
Configuration for CO2 level control, setpoints, deadbands, and alarms specific to the gPod model.
To Next Page
