6 • Mini dap4 User Manual
1.7 HISTORICAL DATA DISPLAYED
EQUIPMENT RUNTIMES: Blower, compressor 1, compressor 2 (as applicable), reheat, dehumidication, Energy
Saver*, humidier, condenser and chilled water
ALARM HISTORY: Alarm list with time and date of occurrence
LAST 24 HOURS: High and low temperature, high and low humidity
AVERAGE PERCENT OF CAPACITY LAST HOUR: Compressor(s), humidier, reheat strips and water valve
1.8 PROGRAMMABLE SELECTIONS
TEMPERATURE SETPOINT TEMPERATURE DEADBAND
HIGH TEMPERATURE ALARM LIMIT LOW TEMPERATURE ALARM LIMIT
HUMIDITY SETPOINT HUMIDITY DEADBAND
HIGH HUMIDITY ALARM LIMIT LOW HUMIDITY ALARM LIMIT
COMPRESSOR LEAD/LAG SEQUENCE RESET EQUIPMENT RUNTIMES
AUDIO ALARM MODE HUMIDITY ANTICIPATION
COMPRESSOR SHORT CYCLE ALARM DEHUMIDIFICATION MODE
LOW DISCHARGE TEMPERATURE ALARM LIMIT* POWER RESTART/RESTART MODE
SYSTEM START DELAY MANUAL DIAGNOSTICS
MESSAGE FOR OPTIONAL ALARM 1, 2, 3 PERSON TO CONTACT ON ALARM
DELAY FOR OPTIONAL ALARM 1, 2, 3 TEMPERATURE SCALE
COMPRESSOR ASSIST TO ENERGY SAVER REHEAT STAGES
REMOTE ALARM SELECTION COMPRESSORS
FIRESTAT TEMPERATURE ALARM LIMIT HUMIDIFIER
CALIBRATE TEMPERATURE SENSOR WATER VALVE VOLTAGE RANGE
CALIBRATE HUMIDITY SENSOR REVERSE ACTING WATER VALVE
SCHEDULED NORMAL MAINTENANCE COOLING STAGE to STAGE BAND
NETWORK PROTOCOL* ANALOG OUTPUT for MOD CW
CALIBRATE DISCHARGE AIR SENSOR* ANALOG OUTPUT for MOD HUMID
CALIBRATE CHILLED WATER TEMPERATURE SENSOR* WATER VALVE MODE
To Next Page
Loading...
Need help?
General
