DataCard LM200 Installation Guide

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 71
14. SelecttheMakethisthedefaultprintercheckboxifyouplantouseonlythisprinterfrom
thisPC.ClickNext.
15. Theprinterisinstalledwithsharingenabledbydefault.Usethedefaultnameorentera
Sharenameifneeded,andthenclickNext.TheSharename
cannotcontainanyspaces.
i f
 Sharingcanbedisabledafterthedriverisinstalled,ifneeded.
 Tosharetheprinter,referto“SharingaPrinteronaNetworkConnection”onpage 76.
16. SelectCreateanewportandthenclickNext.

DataCard LM200 Specifications

General

Brand	DataCard
Model	LM200
Category	Laminator
Language	English