EasyManua.ls Logo

Datacolor Spyder X User Manual

Datacolor Spyder X
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
QUICK START GUIDE
What You Get
• SpyderX Sensor
• Serial Number
• Welcome Card – Including warranty information and download instructions
System Requirements
• Windows 7 32/64 and above
• Mac OS X 10.10 and above
• Monitor Resolution 1280x768 or greater
• 16-bit video card (24-bit recommended)
• 1GB of available RAM
• 500MB of available hard disk
• Internet connection for software download
• USB port
Support
support.datacolor.com
Question and Answer IconNeed help?

Do you have a question about the Datacolor Spyder X and is the answer not in the manual?

Datacolor Spyder X Specifications

General IconGeneral
BrandDatacolor
ModelSpyder X
CategoryAccessories
LanguageEnglish

Summary

Spyder X Quick Start Guide

Monitor Preparation Before Calibration

Ensure the monitor is warmed up and free of direct light. Reset monitor controls and disable auto brightness.

Install and Activate SpyderX Software

Download and install the SpyderX software from the Datacolor website. Activate using the included serial number.

Connect and Position SpyderX Device

Plug the SpyderX into a USB port, remove the lens cap, and hang it on the monitor display as instructed.

Perform Display Calibration

Follow the on-screen prompts in the SpyderX software to create a custom display profile for accurate colors.