Need help?Do you have a question about the Datacom DM991C and is the answer not in the manual?
Observe security instructions, grounding, and static electricity precautions during installation and operation.
Describes G.SHDSL transmission, line coding, and modulation for different annexes.
Explains the pre-activation phase for establishing G.SHDSL connections.
Details the activation phase for determining digital filter coefficients.
Describes the final stage of G.SHDSL connection for normal data transmission.
Covers software configuration for terminal type, frame mode, and annex.
Discusses performance factors and reach based on data rate and line conditions.
Explains operating modes for 4-wire G.SHDSL modems on two or four wires.
Describes the G.704 frame structure, timeslots, and multiframe organization.
Table detailing the CRC4 multiframe structure and bit assignments.
Describes CAS multiframe alignment using timeslot 16 for channel signaling.
Details HDB3 coding and AMI coding for G.703 signals.
Specifies electrical characteristics for G.703 coaxial cable interfaces.
Specifies electrical characteristics for G.703 twisted pair interfaces.
Provides essential safety warnings for installation, operation, and maintenance.
To Next Page
General